Brewing With Maple Sap
While I was in Berlin over the summer, I was first introduced to the idea of a beer made entirely from maple sap. On one of my visits to the Berlin Bier Shop, store owner Rainer Wallisser pointed to a bottle of beer he had just gotten from a Russian brewer. With a sly smile, he said: "There's no water in that beer." Enjoying my confusion, he explained how the beer was brewed with only maple sap in place of water. Though I didn't get to taste the beer, I was immediately fascinated with the concept and pledged to brew one of my own.
I wasn't entirely sure how I would ever procure the necessary quantities of sap required to make an entire beer, but this past Spring, I discovered that a friend of mine makes maple syrup every year from his roughly fifty trees in Newton, Massachusetts. I asked him on a whim how much he would charge for roughly ten gallons of maple sap. "Charge?" he scoffed. "I'll just give it to you!" Turns out his trees were having a banner year, yielding as much as 164 gallons within the first week.
I began formulating a recipe, but was rather surprised to see just how little information was available. Despite living in a region full of maple trees, there was surprisingly local president (I have since found a couple other brewers who have done the same.) Even the internet was little help; plenty of brewers using maple syrup, but essentially none using maple sap. By far the most helpful article was the 1988 winter issue of Zymurgy. The author, Morgan Wright, answered several questions, though by brewday, I still had far more that remained unanswered.
|Carbonated Maple Sap|
By itself, maple sap is a pretty subtle beverage. In the past, I have enjoyed the carbonated maple sap Vermont Sweetwater Bottling Company, but I found the sap from my friend's trees vastly different. This sap was silky and smooth on the tongue with a slight woodsy flavor. Any maple flavor was tremendously faint.
|12 Gallons of Sap|
I knew, therefore, that I wanted to brew a pale beer, and though I personally find the Lawson's Maple Tripple a little too sweet for my own tastes, I love the concept of pairing faint maple and woody flavors with that of a Belgian yeast strain. I had contemplated a Maple Porter, but I felt that the dark malts would mask the subtle maple flavors of the sap, and I wanted to let those flavors stand for themselves. Thus it was decided: a Maple Tripel it would be.
I was actually quite lucky: my friend gave me more sap than I had expected, giving me upwards of 12 gallons. This meant that I would have enough sap to do a five gallon Tripel and a one gallon second runnings Belgian Pale (a Patersbier).
Deciding to brew a Tripel meant choosing a yeast strain. I have brewed many Belgian-inspired beers, and my favorite strain with which to work is the Chimay strain: WLP 500 or WYeast 1214. I ordinarily opt for the WYeast offering, but my local homebrew store was understocked in 1214. Because of the spontaneous nature of my brew day (I was given the sap just days before, and I didn't want it to sit any longer than necessary), I was unable to do a yeast starter and thus had to be totally reliant on the store to have enough packets of either yeast. The store had two packs of WYeast 1214, and three of WLP500. I bought them all, deciding to pitch the 1214 in the Patersbier, and the WLP500 in the Tripel.
Formulating the grain bill was a little challenging, for I had no idea how much sugar to expect from the sap and how that would react with my wort. Morgan Wright suggests that sap contains 1 1/4 pounds of sap per six gallons. This seemed like a good ballpark from which to work, and I built the recipe with that in mind.
72% Belgian Pils
8% US 2-Row
4% Weyerman Abbey Malt
1oz Tettnang (60 minutes)
1oz Tettnang (30 minutes)
White Labs 500
I decided upon a two hour boil, in hopes of concentrating the maple flavor and caramelizing some of the sugars.
The Patersbier was hopped 1/2 oz of Sterling at 60.
The pre-boil gravity reading was for the Tripel and Patersbier was 15.2° and 5° brix respectively.
But now that I wasn't using Boston water, I naturally wondered how the water chemistry of sap would effect the finished beer. I hypothesized that the different minerals in sap might actually contribute more to the finished flavor profile than the presence of maple (a hypothesis I have since confirmed).
In his Zymurgy article, Morgan Wright supplied the a rough estimate of the mineral content in sap. And though I assume that the mineral content varies from region to region depending upon the soil, I am also assuming that his estimation is at least in the same ballpark as other maple trees.
Because I was doing a Belgian-style beer – and using a Chimay strain – it was interesting to compare this profile with those of those of the Trappist breweries. Below is a chart comparison:
Westmalle and Chimay readings are taken from "Brew Like a Monk" by Stan Hieronymus
It was interesting for me to discover just how different the water profile of Boston water is: because it is very soft water, most of the minerals found in other water supplies are present in only very small amounts. However, because every measurement in the Maple Sap was fairly similar to one of the Trappist breweries (with the exception of Chloride), I decided to forgo any alteration of the water profile, aiming to keep the beer as pure as Newton's sap.
I fermented both beers at 72°, allowing yeast to naturally ramp up the temps over time to roughly 80°. The Patersbier was fermented for two weeks and then kegged with a PSI of 8. The full beer sat in primary for four weeks, then kegged & bottled.
With only one gallon of Patersbier (named "Newton") in my keg, I was able to drink a fully carbed beer within two days of kegging. The beer was a light golden color with absolutely no head retention. There were some small black flakes that settled on the bottom of the glass, but they contributed no off flavors or aromas. I am not entirely sure what these are, though I assume they must be a byproduct of having used sap.
The beer itself was everything I look for in a Patersbier, and I couldn't have been happier: easy drinking but with plenty of character and flavor. Super dry with a faint woodiness, it was crisp with just a hint of spicy clove in the back. And while I certainly wouldn't call the beer "hoppy," there was a long lingering bitterness that suggested far more hops than were actually present. (A friend felt the beer had a certain Lager character.) The dryness was likely a combination of the sugars in the maple sap as well as the Chimay yeast which usually finishes quite dry.
There was absolutely no discernible maple flavor to the Patersbier. Blindfolded, I wager no taster would ever guess it was brewed with sap as opposed to water. Even the woody flavor I mentioned was so subtle it really could have been a byproduct of the mineral profile as much as the fact that it came from a tree. While I expected to find little maple flavor, I was surprised just how little there actually was (and by "little," I really mean "none!")
This Patersbier was easily one of the best beers I had ever brewed, and I was really curious to see how it would compare to the full version. Because I wanted to age some of the bottles and see how the flavors developed over time, I decided to keg one gallon, bottle three gallons, and pitch brett into one gallon.
The full version of the Maple Tripel (named "Nature's Kiss") couldn't have been more different from the Patersbier. With an FG of 1.012, it clocked in at 9.1% abv. As one might expect with such a high alcohol level, the beer had a residual sweetness to it that immediately set it apart from the dryness of Newton. Despite the sweetness, there wasn't much booziness. A much darker beer, it had a dark caramel orange color with more of the black sediment present in Newton. The beer had a tremendous banana aroma and flavor, and was arguably one of the most banana-y triples I've ever tasted.
This huge banana character really gave me quite a pause, and I realized that I had inadvertently
As I continued to work my way through my kegged beer, I couldn't get past the banana character. I experimented one evening with adding 1/2 tsp of Woodford Reserve Bourbon to my glass, and I was tremendously impressed with the result. The bourbon helped to smooth out the beer, and the vanilla notes of the bourbon complemented the banana notes of the beer so well, it was truly a match made in heaven! (I continued to add bourbon to every remaining glass!)
Roughly a month after finishing my keg, I cracked open my first bottle (which I had primed with maple syrup from the same trees). The beer had a lovely head and was significantly better balanced than it was in the keg. I intend to cellar most of the bottles for about a year and see how they respond to some age.
• Maple Sap in no way impedes the brewing process. The pH levels are similar enough to tap water that all the proper conversions happen during the mash. If brewing with sap, the sap can sit for as long as five days in a refrigerator with no ill effects (cloudiness does not effect flavor).
• Maple Sap imparts no maple flavor when used in the quantities required to make beer. Considering that it takes 40 gallons of maple sap to produce one gallon of maple syrup, this shouldn't necessarily come as a surprise.
• If more maple flavor is desired, I recommend using maple syrup or reducing the sap in a pre-mash boil.
• Despite the lack of maple flavor, maple sap has a very unique mineral content that does effect flavor. Personally, I find this to be a pleasing flavor profile, and I do not think any further alteration of the water chemistry to be necessary.
One further thing to consider: The sap I used for these beers was early-season sap. As the season progresses, the sap becomes much thicker with more highly concentrated sugars. This is why "Grade B" syrup (usually made in April) is much darker and has more intense maple flavor than it's younger cousins "Grade A" or "Amber." If one were to brew with sap from a later in the season, the maple flavor would likely become more present.
In the end, I found this to be tremendously fun experiment, and one I may do again – after all, that Patersbier was one of the best things to ever come out of Churchyard Brewery. But I feel I can safely conclude that brewing with maple sap doesn't really produce radically different results than brewing with water. If maple flavor is what is sought, it really makes more sense to use maple syrup in addition.
I would be really interested to hear other people's experiences. If anyone has brewed with sap, please share!